Undercover style lighting using the Super LED LINz6 with new Grommet mount for a recessed look.

High intensity light output that cannot be matched by a simple corner strobe or LED installation.

Click for the PDF Download

2519 Series Strobe Beacons	PAR-36 Series Super LED	Leveling Mounting Foot
Siren: Gamma 2 Series

Whelen Releases new Flash Pattern Simulator

Click here to View the new simulator

Small oval LED lighthead with chrome housing and clear lens. Available in flashing or steady burn auxiliary warning, white illumination, and marker/clearance. Add a remote LED flasher to the steady-burn warning model and choose up to 60 flash patterns.

This light is small enough to tuck just about anywhere you need additional warning or illumination. 45° angled bezel model illuminates step surfaces for a sure step every time. Extreme low amp draw lets you add as many as you want.

  Download the brochure – Click Here
Click below for more information and a full product listing

Advanced LED technology provides superior, uniform interior lighting that eliminates hot spots and shadows, closely replicates natural light for monitoring patient skin tones, and illuminates cabinets and emergency equipment for critical response procedures. Certified to meet NFPA, KKK or FMVSSA requirements, Whelen LED lights are reliable, moisture and vibration resistant and will provide many hours of peak performance and all the many benefits of LED technology. Designed to easily replace your present outdated lighting.

Interior Ambulance lighting with advanced LED design provides:
■ Long-life performance.
■ Eliminates the high cost of lamp replacement associated with halogen and incandescent lamps.
■ Reduced interior ambient temperature than halogen and incandescent fixtures.
■ Encapsulation provides moisture and vibration resistance.
■ Four intensity levels available to match your needs under emergency conditions.
■ Direct replacement to outdated halogen and incandescent lighting fixtures.
■ Standard 6” pigtail.
■ Certified to meet KKK 1822E requirements.

Strip-Lite™ Series Super-LED® Compartment Lights

Choose from two levels of lighting depending upon the area to be illuminated and the amount of light required. Designed for cabinet and interior applications. An optional stainless steel, forty-five degree bracket mounts to the cabinet doors to flood the compartment with light. Clear frosted polycarbonate lens.

PSC0ADCR ……..Level Two intensity (three LED diodes).
PSC0CDCR ……..Level Three intensity (six LED diodes).
PSBKT451 ……….Forty-five degree mounting bracket for single strip light.
PSBKT452 ……….Forty-five degree mounting bracket for two strip lights.

2G Series 4” Round Super-LED Compartment Lights

Choose from two levels of intensity and this versatile lighthead is the ideal choice to replace many existing, outdated halogen fixtures with the performance and reliability of Super-LEDs. Available with optional surface mount, chrome-plated flange or grommet mounting. Specify Deutsch® connectors where harsh environment calls for a water-resistant connection. Certified to meet NFPA ground perimeter lighting under your vehicle.

20C0BDCR ………Level Two intensity (three LED diodes).
20C0BDCD ………Level Two intensity with Deutsch connector.
20C0CDCR ……..Level Three intensity (six LED diodes).
20C0CDCD ………Level Three intensity with Deutsch connector.
2GFLANGC ………2G Series ABS chrome-plated flange for surface mount.
2GROMMET …….2G Series grommet mount.

5G Series Compartment Lights

New optional chrome-plated surface mount flange or grommet mount make these versatile lightheads perfect for interior/exterior lighting applications. Size and rugged construction makes these ideal for many mounting surfaces. Certified to meet NFPA ground perimeter lighting under your vehicle.

5GCOACCR ……..Single diode compartment light.
5GC0CCCR ………Triple diode compartment light.
5GFLANGC ………5G Series ABS chrome-plated flange for surface mount.
5GROMMET …….5G Series grommet mount.

Super-LED Ambulance Interior Light

Whelen’s interior Super-LEDs render light that approximates natural light at mid-day for truer fl esh tones and more accurate patient evaluation. Light is distributed evenly over the ambulance interior without hot zones and shadows. Lightheads feature High/Low intensity mode, and, an industry first …. four dimming levels from the High intensity mode. Properly installed with eight lightheads, this product is certified to meet KKK 1822E 3.8.5.1.

80C0EECR ……….Ambulance interior light.

Oval Series Super-LED

Marker, Clearance and Flashing Lights Tiny encapsulated LED lighthead (1” x 1 ½”) with chrome-plated ABS housing provides endless possibilities for putting high performance lighting wherever needed on your vehicle! Amber or Red marker/clearance lights Ideal for ICC lights. Marker/clearance lights are certified to SAE/FMVSSA in
red or amber for use on under 80” or over 80” wide vehicles.

0SA00MCR ……..Amber marker/clearance.
0SR00MCR ……..Red marker/clearance.

Amber, Red and Blue flashing lights with single flash pattern for supplemental lighting anywhere on your vehicle.

0SR00FCR ………Red flashing, one pattern, SingleFlash.
0SA00FCR ………Amber flashing, one pattern, SingleFlash.
0SB00FCR ………Blue flashing, one pattern, SingleFlash.

Amber, Red and Blue flashing lights used with an external flasher or electrical control system applications.

0SR00SCR ………Red flashing, external flasher required.
0SA00SCR ………Amber flashing, external flasher required.
0SB00SCR ………Blue flashing, external flasher required.

White Illumination

Ideal for supplemental lighting in confined area.

0SC0EDCR ………White single diode illumination light, no fl ash patterns.

Here’s a rugged little powerhouse that shrugs off moisture and road shock while giving you “heads up” performance… anywhere on your vehicle!

   Click for Introductory Video

Download the brochure – Click Here

• A sub-compact, full-featured LED lighthead with wide-angle light spread which can be mounted virtually anywhere.
• Clear non-fluted lens and black ABS flange standard, optional chrome flange available.
• Whelen patented Linear-LED® wide-angle optics for maximum visibility.
• Minimal current draw and designed for heavy-duty, vibration, moisture and corrosion resistance.
• SmartLED® design requires no design requires no external flasher.
• Split colors available.
• Surface mounted with no external flasher, easy to install.
• 69 Scan-Lock™ flash patterns, including steady-burn. Alternating and simultaneous patterns available.
• Eight Scan-Lock flash patterns allows for alternate or simultaneous flash of each color segment (3 x 3).
• The “synch” interconnect wire allows up to eight lightheads to be synchronized together.
• Fully encapsulated electronics provide full moisture and vibration protection.
• 12 VDC.
• 5 year warranty on LEDs.

SPECIFICATIONS

2″ H x 4″ W x 1 5/8″ D

LINZ6*
NEW Horizontal Mount, Red, Blue or Amber

LINZ6C
NEW Horizontal Mount, White

LINZ6K
NEW Split Amber/Red Lighthead, Horizontal Mount

LINZ6J
NEW Split Blue/Red Lighthead, Horizontal Mount

LINZ6D
NEW Split White/Red Lighthead, Horizontal Mount

LINZ6FC
NEW Optional Deep Chrome Plated Mounting Flange Kit

Replace ” * ” symbol in model number with letter indicating lens color or LED color desired:
A = Amber; B = Blue; C = Clear/White; R = Red; G = Green

The small solution and versatile answer for putting LED lighting virtually anywhere on your vehicle!

Small oval LED lighthead with chrome housing and clear lens. Available in flashing or steady burn auxiliary warning, white illumination, and marker/clearance. Add a remote LED flasher to the steady-burn warning model and choose up to 60 flash patterns. This light is small enough to tuck just about anywhere you need additional warning or illumination. 45° angled bezel model illuminates step surfaces for a sure step every time. Extreme low amp draw lets you add as many as you want.

FEATURES
■ Warning models contain four bright LEDs and are available in two versions; flashing or steady-burn.
■ Steady-burn warning requires an external LED flasher, purchased separately.
■ Warning models are available in red, amber, white, and blue.
■ Red warning certified to SAE J595, SAE J845 and Class 3. Amber and blue warning certified to SAE J845.
■ White Illumination has single Super-LED® diode. Available with standard or 45° angled housing for surface or step lighting; certified to NFPA 13.10.3 surface lighting
■ Marker/clearance light available in red and amber, and certified to meet SAE J592.
■ All models include chrome plated flange and mounting gasket.
■ Surface mount.
■ Encapsulated for moisture and vibration resistance.
■ Extremely low .30mA (avg) amp draw.
■ Includes 6" wire leads.
■ 5 year HDP® Heavy-Duty Professional warranty
■ Dimensions: 1” (25mm) H x 1/2" (13mm) D x 1-1/2” (38mm) L.
45° bezel housing is 1" (25mm) H x 7/8" (21mm) D x 1-7/8 (48mm) L.

MODELS
0S*00FCR: 4 LED warning, 1 flash pattern.
0S*00SCR: 4 LED warning, steady burn.
0SC0EDCR: Single LED, white illumination light.
0AC0EDCR: Single LED, 45° bezel white illumination light
0S*00MCR: 4 LED, marker/ clearance light, amber or red