FIRE - POLICE - UNDERCOVER - WATERPROOF - MOTORCYCLE

X-ECUTOR™ JR. Series
All electronic (mechanical sounding)

Easy to install on new emergency vehicles or retrofit to existing units. High sound levels and all the harmonic content and authority of traditional mechanical sirens but with state of the art electronic operation. Choose from X-ECUTOR JR. models for single or dual speaker system that draws approximately 10-13 amps! That's 1/3 of the amperage draw of the closest mechanical sounding competitive siren but with richer more resonant sound.

Cut Sheet - 357k

SA314 SERIES
Projector Series high performance, multi-port 100 watt speaker puts high performance traffic clearing warning sound where it counts: down and in front of your vehicle. Properly installed away from your vehicle's interior, this speaker complies with OSHA 1910.95 guidelines regarding "Permissible Noise Exposure." Narrow, non-corrosive aluminum or nylon composite housing provides ease of mounting. Installs to vehicle’s cross member in minutes. All models exceed CA Title XIII, Class A and SAE J1849 requirements. Available in cast aluminum natural finish or black epoxy coated finish and black nylon/composite. Options include Universal mounting bracket or brackets for Ford Crown Victoria and Explorer, Chevy Impala, Suburban, Tahoe, Blazer and Dodge Intrepid. Refer to current price list for details. Size: 6-3/16” (156mm) H x 6-7/16” (163mm) W x 3-1/2” (80mm) D.

Model - SA314A

122 dB Speaker, Natural Aluminum Finish

Model - SA314B

122 dB Speaker, Black Epoxy Coated Finish

Model - SA314P

123 dB Speaker, Nylon/Composite

OPTIONS

BKGBL	Mounting Bracket for Chevy Suburban 1992-99
SABKT1	Universal Mounting Bracket for SA314 Speaker
SABKT2	Mounting Bracket for Ford Crown Victoria, 1998-2000
SABKT3	Mounting Bracket for Chevrolet Impala, 2000
SABKT4	Mounting Bracket for Ford Explorer, 1995-2001
SABKT5	Mounting Bracket for Chevrolet Suburban/Tahoe, 2000
SABKT6	Mounting Bracket for Chevrolet Blazer, 2000

295HFS HANDS FREE SIRENS WITH DIAGNOSTIX™ & SI TEST®
295HFS Series siren amplifiers are available in a wide variety of installation configurations. Models 295HFSA1 through 295HFS6 & 295HFSDA AMECA certified to meet Class A requirements of SAE, KKK1822 and California Title XIII specifications. (Certifications are based on siren amplifier and speaker combination. Contact factory for specific speaker model information.) Six functions, plus radio repeat and public address. Pre-wired noise cancelling directional microphone (separate microphone with screw-in connector optional on some models). Hands-Free operation. Adjustable microphone and radio repeat volume controls. 100/200 watt output. SI TEST®, fully diagnostic silent test of amplifier and speaker(s). LED indicators verify proper operation. Real-time DiagnostixTM, LED indicators verify operation of amplifier and speakers during use. Adjustable intensity backlighting in soft LED non-glare green. Exclusive five year, Heavy Duty Professional (HDP) warranty.

Model - 295HFSA1

Self contained unit for underdash or rack mounting. Size: 2-1/2” (64mm) H x 6” (152mm) W x 6-7/8” (174mm) D.

Model - 295HF100

Economically priced. 100 watt output only. Six function siren plus radio repeat and public address. Self contained unit for under-dash mounting.

Model - 295HFS2

Flush mount control head with remote amplifier. Size, control head: 2-7/8” (73mm) H x 6-1/4” (159mm) W x 2-3/8” (61mm) D. Size, amplifier: 2-3/8” (61mm) H x 6” (152mm) W x 7” (178mm) D.

Model - 295HFS2X

295HFS2 with dual amplifiers, meets California Title 13 requirements

Model - 295HFS3

Surface or under-dash mount control head with remote amplifier. Size, control head: 2” (51mm) H x 6” (152mm) W x 2-3/8” (61mm) D. Size, amplifier: 2-3/8” (61mm) H x 6” (152mm) W x 7” (178mm) D.

Model - 295HFS4

9 switch controls for lighting functions. Surface or under-dash mount control head with remote amplifier. Four position slide switch, six push-on/push-off switches. Directly compatible with Edge or AdvantEdge lightbars with built-in relay matrix assem

Model - 295HFSA5

9 switch controls for lighting functions Self contained unit for under-dash mounting. Low current switching, 295HFS5; high current switching, 295HFS6 (80 amps maximum). Size: 3-5/16” (85mm) H x 6” (152mm) W x 8-3/8” (213mm) D.

Model - 295HFSA6

9 switch controls for lighting functions Self contained unit for under-dash mounting. Low current switching, 295HFS5; high current switching, 295HFS6 (80 amps maximum). Size: 3-5/16” (85mm) H x 6” (152mm) W x 8-3/8” (213mm) D.

OPTIONS

295HFSDA	Second Amplifier (Kit) for Dual Siren Amplifier Use (Remote Models Only)
SWGBKT	Swing Away Bracket for 295HFS4 only

POWER AIR HORN & POWER AIR HORN PLUS SERIES AND OPTION

Model - PAH112

100 Watt Air Horn Tone Only

Model - PAP112

100 Watt Air Horn Tone Plus Public Address, includes Microphone

OPTIONS

PAPEXT15

15' Microphone extension Cable for PAP112 Only

BETA™ SIREN SERIES

SELECTABLE SIREN TONE, RADIO REPEAT, PUBLIC ADDRESS AND OPTIONS

Model - BETA1

For installations where space is at a premium, the compact BETA1 provides full access to the BETA112R's operational capabilities. Rotary switch selections include: Radio; PA; Manual; HF; Wail; Yelp and Tone 3 (Piercer or Hi/Low). The BETA1 also includes

Model - BETA112R

Economically priced, the 100 watt Beta Remote Siren Amplifier offers multiple tone selection, public address, radio repeat and HANDS-FREE operation. Available tones include: Wail, Yelp, Piercer or Hi/Low and Airhorn. The Beta 112R may be used with custome

Model - BETA2

Full Function Control Head Only, Weather Resistant, 20 Ft. Cable, Surface Mount

OPTIONS

BETA2BKT	Mounting Bracket for BETA2 and WPA1 Only, Flange Mount
BETAMIC	Remote Mic for use with BETA112 (for use with Customer Supplied Switches)

Model - SA150M

Motorcycle Siren Speaker, 58 Watts

Model - SA350M

Motorcycle Siren Speaker, 100 Watts

Model - WPA1

Full Function Control Head Only, Weather Resistant, with a 7 1/2 Foot Cable, for Handlebar and Surface Mounting (Motocycle)

Model - WPA112

Water Proof 100 Watt Siren Amplifier

Model - WPA2

Full Function Control Head Only, Weather Resistant, 20 Ft. Cable, Flush/Surface Mount (Marine)

OPTIONS

BETA2BKT

Mounting Bracket for BETA2 and WPA1 Only, Flange Mount